Arduino for STM32

I tried Mozzi library and it's compatible with stm32duino core. Tested on stm32F103CB, STM32F401CC and STM32F411CE. All using pin PA8 PWM as audio output (as ag123 mention, STM32F411CE don't have DAC). But it's little complex for me, and i think it would be easier for me to implement double-buffered...

As arduino, STM32 can use high PWM pulses to create audio. With even higher resolution because of better timers hardware. STM32 have some boards with 12bit DAC ( like cheap WeAct STM32G431CBU6 ). For a start, you could use example from https://github.com/stm32duino/STM32Examples/blob/main/examples/P...

Try sketch from viewtopic.php?t=1962

It might work for you...

Replace with I can't say will it work (i'm not familiar with dma functions in rogers core), but at least it will compile.

As i understand, if enabled, I2S use 16bit Data Register, regardless if SPI is set to use 8bit data format.
Try to set PSIZE, MSIZE bits in DMA SCR register ( and your buffer ) as 16bit size, not as 8bit.

You need to install drivers :
https://github.com/rogerclarkmelbourne/ ... er/drivers

BlackPill F401CC is for boards with 25MHz crystal Generic F401CCUx is for boards with 8MHz crystal You must select "USB support->CDC (generic Serial supersede U(S)ART)" from menu or "Serial" will on serial port (PA9/PA10), not as recognizable USB device. Clipboard01.jpg If you st...

Until SdFat is updated, there is simple workaround: use SPI library from 2.6.0. Downgrade core to 2.6.0, copy SPI folder from "c:\Users\moi\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.6.0\libraries\" to "c:\Users\moi\Documents\Arduino\libraries\", and upg...

I compiled and tested DLO-138 and it's working with my LCD. Using Rogers core, Adafruit_GFX V1.7.5. I was unable to upload with Arduino IDE (probably WIN11 and Arduino 2.2.1 IDE issue), but with exported binary i flashed it with ST-link and STM32CubeProgrammer (tricky, press and hold reset on DSO138...

Have you consider to use that one pin on separate port for address A0? So you can keep A12 on port with 12 pins. In worst case, you are reading data from address $xxx0 when A0 is 0, and from address $xxx1 when A0 is 1.

74HCT595 is good for sync timing, but if it's too slow, you could use 74HCT273.