Arduino for STM32

I'd advise to: - check the return value from radio.begin() (https://nrf24.github.io/RF24/classRF24.html#a048a20c73c7d9b2e02dcbae6fb9c4ba8) - try to explicitly specify the SPI pins (e.g. https://github.com/stm32duino/wiki/wiki/API#change-default-spi-instance-pins) - check the Nucleo pins you are usin...

The workaround seems to be using LSE as a clock source for the RTC: #include <STM32LowPower.h> STM32RTC& rtc = STM32RTC::getInstance(); void setup() { pinMode(PA10, OUTPUT); // with LSE as a clock source, the MCU wakes up from deepSleep() as expected rtc.setClockSource(STM32RTC::LSE_CLOCK); rtc....

Thanks for you suggestion @mebab. There is a small delay already provisioned for in LowPower_stop() (called from LowPower.deepSleep()) - https://github.com/stm32duino/Arduino_C ... wer.c#L246

I'm trying to diagnose a strange deepSleep() behaviour on a custom designed PCB with STM32L412KBT6 with LSE. After a power up, the MCU deepSleeps/wakes up normally for 2-3 minutes, but after 2-3 minutes, the wake up does not happen. Test setup: - A single led is connected through a current limiting ...

After updating STLink from V3J2M1 to V3J2M3 Mass Storage update method also works, thanks again @fpiSTM!

You can also take a look at the .map in the build directory to see if anything looks strange. Thanks mlundin , I'm periodically running "arm-none-eabi-nm --size-sort" on the binary but there's not much I can quickly shave off at the moment for the code I'm working on. The sketch reproduci...

Thanks @fpiSTM, STM32Cube Programmer (SWD) as upload method nicely works as expected.

Code with binary size larger than approximately 65140 bytes does not work on Board Nucleo-32 with Board Part Number: "Nucleo G431KB". Forum search did not yield any results. I've reproduced the behaviour with Serial to make the steps to reproduce easier. Steps to reproduce: 1. Unzip the at...