Arduino for STM32

note that libmaple core has its origins here http://docs.leaflabs.com/static.leaflabs.com/pub/leaflabs/maple-docs/latest/maple-quickstart.html it is really fine core for those willing to venture beyond the 'com' ports i actually played with the original maple arduino ide and literally used it in to...

before doing a 'reset' , a few more things to try: after following the instructions, connect usb - press reset on the pill board in device manager did windows find a usb dfu device ? you can try the next steps nevertheless if it did in the (arduino) IDE make a sketch e.g. uint8_t led = 0; void setu...

I installed bootloader by this tutorial... I am a beginner at this, so please understand me. if you are using windows follow these instructions to get usb-serial and DFU working https://github.com/rogerclarkmelbourne/Arduino_STM32/wiki/Installation ^^ please read the instructions here as well If us...

BluePill has an USB connector. you don't need the USB-to-TTL adapter. without the stm32duino bootloader you can't upload over USB , but you should be able to print to Serial Monitor over USB with Serial like on any Arduino. the ST-Link doesn't use 'com' port for upload, so you can have the com port...

ST-Link is not a Serial adapter, it is a programmer. You can't open a Serial Monitor over ST-Link. to see the Serial prints connect the Blue Pill with USB cable. without bootloader listening on USB you can't upload over USB but it works as Serial (or Serial1?) with Serial Monitor or other terminal ...

Hi, I started using STM32F103C8 (Blue Pill) and I have encountered a problem. I am using ST-LINK v2 for communication and Arduino IDE. I installed everything right and when I upload code over ST-LINK, it is working, so the communication is fine. You can see that i uploaded a blink and it's working: ...