Search found 1723 matches

by fpiSTM
Wed Mar 13, 2024 9:38 am
Forum: Libraries & Hardware
Topic: Simplifying I2S Bus Implementation on STM32WL55JC1 with Arduino IDE
Replies: 1
Views: 233

Re: Simplifying I2S Bus Implementation on STM32WL55JC1 with Arduino IDE

HAL_I2S_MODULE_ENABLED is defined by default. You should check the system core clock config to see of the I2S is correctly configured. Then you can simply call the HAL I2S API. Pay attention to the IRQ handler definition if you are in Cpp file, it have to be prefixed by extern "C". You can...
by fpiSTM
Wed Mar 13, 2024 9:31 am
Forum: General discussion
Topic: SPI.end() hangs on maple mini
Replies: 2
Views: 229

Re: SPI.end() hangs on maple mini

By default, the SPI instance is mapped to the SPI1, anyway, it is easy to override it to use the SPI2 and linked pins. You can read the wiki: https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/SPI/README.md#change-default-spi-instance-pins So first way is simply to change pins at r...
by fpiSTM
Mon Mar 04, 2024 8:11 am
Forum: Let us know a bit about you and your projects
Topic: hi, Yves from Brest in Brittany.
Replies: 1
Views: 143

Re: hi, Yves from Brest in Brittany.

Bonjour Yves et bienvenue.
You can find here an example of cube project to Arduino.
viewtopic.php?p=669#p669
by fpiSTM
Tue Feb 27, 2024 5:37 pm
Forum: General discussion
Topic: Problem Uploading to STM32F405 from Arduino IDE
Replies: 3
Views: 307

Re: Problem Uploading to STM32F405 from Arduino IDE

So you used dfu? And you shorten the boot0 pin? Then press reset?
The STM32CubeProgrammer is well installed?
The bord is recognized as stm32bootloader ?
by fpiSTM
Fri Feb 23, 2024 7:56 am
Forum: General discussion
Topic: Nucleo F446ZET6 Support in STM32duino 2.3.0?
Replies: 1
Views: 348

Re: Nucleo F446ZET6 Support in STM32duino 2.3.0?

This board is supported since 2.7.0:
https://github.com/stm32duino/Arduino_C ... /pull/2108

Simply update to the latest core.
by fpiSTM
Thu Feb 22, 2024 9:01 am
Forum: General discussion
Topic: How to use PC14/PC15 as GPIO on STM32F407VGT6
Replies: 5
Views: 408

Re: How to use PC14/PC15 as GPIO on STM32F407VGT6

I've tested with a disco F407, LSE is not fitted so PC14 and PC15 are free.
Using default blink sketch using those pins and it works.
Maybe pio do some extra config preventing to use them...
Test with Arduino IDE.
by fpiSTM
Wed Feb 21, 2024 5:18 am
Forum: General discussion
Topic: How to use PC14/PC15 as GPIO on STM32F407VGT6
Replies: 5
Views: 408

Re: How to use PC14/PC15 as GPIO on STM32F407VGT6

Which board you select to build?
Code?
by fpiSTM
Fri Feb 16, 2024 5:16 pm
Forum: Projects
Topic: DCS BIOS with STM32
Replies: 2
Views: 309

Re: DCS BIOS with STM32

My guess is it support libmaple core and not the stm32 core. https://github.com/DCS-Skunkworks/dcs-b ... d-Hardware

So a port should be done to support the stm32 core.
by fpiSTM
Thu Feb 15, 2024 8:46 pm
Forum: General discussion
Topic: How to access low level registers or How to set TIM1 to 128Mhz
Replies: 10
Views: 1040

Re: How to access low level registers or How to set TIM1 to 128Mhz

It will be called automatically as it replace the weak function.

Go to advanced search