I suggest to use the hardware serials https://github.com/stm32duino/wiki/wiki ... wareserial of the F411, not the software serial as done for Arduino Uno
See the pin map:
Search found 4 matches
- Sun Jul 26, 2020 2:05 pm
- Forum: STM boards (Discovery, Eval, Nucleo, ...)
- Topic: Softwareserial issue on stm32 f411re
- Replies: 8
- Views: 9272
- Sun Jul 26, 2020 1:41 pm
- Forum: STM32F4 based boards
- Topic: F411 (and F401) bootloaders
- Replies: 34
- Views: 210454
Re: F411 (and F401) bootloaders
Yes but you need to modify some Arduino IDE boards files to add the WeAct uploader software in the IDE menu A work around is to compile the sketch e create the shetck.bin file e then upload it in a console using: ./WeAct_HID_Flash-CLI Sketch.bin under linux or ./WeAct_HID_Flash-CLI.exe Sketch.bin un...
- Sun Jul 19, 2020 2:52 pm
- Forum: STM32F4 based boards
- Topic: F411 (and F401) bootloaders
- Replies: 34
- Views: 210454
Re: F411 (and F401) bootloaders
You need to use their uploader sofware called WeAct_HID_Flash-CLI, to be downloaded from https://github.com/WeActTC/MiniF4-STM32 ... Bootloader
- Sat Jul 18, 2020 12:42 pm
- Forum: STM32F4 based boards
- Topic: Tracing issues with WeAct STM32F411
- Replies: 4
- Views: 9789
Re: Tracing issues with WeAct STM32F411
Uploading the Blink Sketch the WeAct HID Bootloader has been deleted It's possible to re-install it using this instruction https://github.com/WeActTC/MiniF4-STM32F4x1/issues/8#issuecomment-627926032 The bootloader firmware is here: https://github.com/WeActTC/MiniF4-STM32F4x1/blob/master/Soft/WeAct_H...