Search found 1762 matches
- Wed Mar 13, 2024 9:31 am
- Forum: General discussion
- Topic: SPI.end() hangs on maple mini
- Replies: 2
- Views: 1366
Re: SPI.end() hangs on maple mini
By default, the SPI instance is mapped to the SPI1, anyway, it is easy to override it to use the SPI2 and linked pins. You can read the wiki: https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/SPI/README.md#change-default-spi-instance-pins So first way is simply to change pins at r...
- Mon Mar 04, 2024 8:11 am
- Forum: Let us know a bit about you and your projects
- Topic: hi, Yves from Brest in Brittany.
- Replies: 1
- Views: 1451
Re: hi, Yves from Brest in Brittany.
Bonjour Yves et bienvenue.
You can find here an example of cube project to Arduino.
viewtopic.php?p=669#p669
You can find here an example of cube project to Arduino.
viewtopic.php?p=669#p669
- Tue Feb 27, 2024 5:37 pm
- Forum: General discussion
- Topic: Problem Uploading to STM32F405 from Arduino IDE
- Replies: 3
- Views: 1386
Re: Problem Uploading to STM32F405 from Arduino IDE
So you used dfu? And you shorten the boot0 pin? Then press reset?
The STM32CubeProgrammer is well installed?
The bord is recognized as stm32bootloader ?
The STM32CubeProgrammer is well installed?
The bord is recognized as stm32bootloader ?
- Fri Feb 23, 2024 7:56 am
- Forum: General discussion
- Topic: Nucleo F446ZET6 Support in STM32duino 2.3.0?
- Replies: 1
- Views: 1660
Re: Nucleo F446ZET6 Support in STM32duino 2.3.0?
This board is supported since 2.7.0:
https://github.com/stm32duino/Arduino_C ... /pull/2108
Simply update to the latest core.
https://github.com/stm32duino/Arduino_C ... /pull/2108
Simply update to the latest core.
- Thu Feb 22, 2024 10:49 am
- Forum: Off topic
- Topic: Where is Administration stm32duino.com??
- Replies: 0
- Views: 2670
- Thu Feb 22, 2024 9:01 am
- Forum: General discussion
- Topic: How to use PC14/PC15 as GPIO on STM32F407VGT6
- Replies: 5
- Views: 1286
Re: How to use PC14/PC15 as GPIO on STM32F407VGT6
I've tested with a disco F407, LSE is not fitted so PC14 and PC15 are free.
Using default blink sketch using those pins and it works.
Maybe pio do some extra config preventing to use them...
Test with Arduino IDE.
Using default blink sketch using those pins and it works.
Maybe pio do some extra config preventing to use them...
Test with Arduino IDE.
- Wed Feb 21, 2024 5:18 am
- Forum: General discussion
- Topic: How to use PC14/PC15 as GPIO on STM32F407VGT6
- Replies: 5
- Views: 1286
Re: How to use PC14/PC15 as GPIO on STM32F407VGT6
Which board you select to build?
Code?
Code?
- Fri Feb 16, 2024 5:16 pm
- Forum: Projects
- Topic: DCS BIOS with STM32
- Replies: 2
- Views: 1521
Re: DCS BIOS with STM32
My guess is it support libmaple core and not the stm32 core. https://github.com/DCS-Skunkworks/dcs-b ... d-Hardware
So a port should be done to support the stm32 core.
So a port should be done to support the stm32 core.
- Thu Feb 15, 2024 8:46 pm
- Forum: General discussion
- Topic: How to access low level registers or How to set TIM1 to 128Mhz
- Replies: 10
- Views: 3782
Re: How to access low level registers or How to set TIM1 to 128Mhz
It will be called automatically as it replace the weak function.
- Thu Feb 15, 2024 8:27 am
- Forum: General discussion
- Topic: How to access low level registers or How to set TIM1 to 128Mhz
- Replies: 10
- Views: 3782
Re: How to access low level registers or How to set TIM1 to 128Mhz
Simply redefine the system core clock config:
https://github.com/stm32duino/Arduino_C ... ock_config
https://github.com/stm32duino/Arduino_C ... ock_config