Pito wrote:I've been compiling the latest source version for my BluePill disconnect pin PB2 and it works fine with BluePill (it compiles for MM, so the BluePill with an external pmos transistor is basically the same as MMini with disconnect at PB2). My understanding therefore is the latests source is ok.
The checksums of the MMv20.bin dated 20.4.2016 I flashed into my MMini on 21.4. are:
Code: Select all
Hi Pito, the problem seems to be with the maple mini HW, not with generic boards, probably bound to an error in the Maple reset hw management; I can confirm that the bootloader for generic boards seems ok: it works fine also for vcc-gnd VET6 and ZET6 boards.