SSD1963

Can someone help me port this library?
ardumodore
Posts: 1
Joined: Mon Apr 27, 2015 4:58 pm

SSD1963

Post by ardumodore » Mon Apr 27, 2015 5:04 pm

Hello guys,

Wondering if porting an SSD1963 lib is already in progress?

maybe UTFT lib with arduino DUE support is a good candidate for STM32 port of SSD1963.

Regards,
Davoud

madias
Posts: 813
Joined: Mon Apr 27, 2015 11:26 am
Location: Vienna, Austria

Re: SSD1963

Post by madias » Mon Apr 27, 2015 8:15 pm

OLED_I2C and adafruit SSD1306 - here you are!
OLED_I2C supports only software I2c mode, because Henning Karlsen has implemented his own I2c code and I have no time converting this. (Tested the speed on PIC32 HW and SW and there is no much difference). The adafruit one works with hardware I2c
https://drive.google.com/file/d/0B3sgtw ... sp=sharing
https://drive.google.com/file/d/0B3sgtw ... sp=sharing
sorry, file to large (450kb?!?) to upload it here.
Edit: I do not own a SPI Oled, so I cannot say if the adafruit library works with that!

Mavrick.J
Posts: 4
Joined: Sun Dec 03, 2017 4:31 pm

Re: SSD1963

Post by Mavrick.J » Mon Dec 04, 2017 9:09 am

Hello,
Interested in buying a 5 or 7 "based on a SSD1963 in SPI mode, has a library solution (Generic STM32F103Cx) been found?

I have browsed the forum, a lot of topic on parrallele mode but I have not seen anything on the SPI version, or not able to find it.

Thank you

User avatar
RogerClark
Posts: 7540
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: SSD1963

Post by RogerClark » Mon Dec 04, 2017 10:00 am

Large screens are hard to find.

Most people seem to use the Nextion

https://www.itead.cc/display/nextion.html

But its not SSD1963 interface

zmemw16
Posts: 1582
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: SSD1963

Post by zmemw16 » Mon Dec 04, 2017 11:00 am

there a're a number of github repo's for ssd1963 and ssd128(9??)
i've a ssd1963 10" somewhere :)
most seem to be 36-40 pin connectors as well, so 8080/6800 type interfaces usually
if the mode connections are accessible, you'll be able to re-configre :-)
any spi connections seem mainly for sdcard if fitted, don't think mine a socket, didn't see any indication of provision for one.

most would require fsmc or fsm, so need vet or zet or better, not sure if anything smaller has either of those.
and almost as usual the majority of repo's are keil4 or keil5 based and also primarily SPL,
i've seen some of the more/most recent that are hal, not sure (which seems strange for me) if i've
seen any CubeMX ioc files.
<edit> some add-in txt</edit/>

stephen

zmemw16
Posts: 1582
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: SSD1963

Post by zmemw16 » Tue Dec 05, 2017 2:32 am

this may well be of interest
https://github.com/golf2109/STM32F429ZI_SSD1963_FT5336

Code: Select all

STM32F429ZI_FMC_SSD1963.ioc
stephen

Mavrick.J
Posts: 4
Joined: Sun Dec 03, 2017 4:31 pm

Re: SSD1963

Post by Mavrick.J » Wed Dec 06, 2017 5:32 pm

Good evening
Thank you for your answers.
The NEXTION I saw. it's a solution, but I'd rather not have a tier system.

Is the RA8875 a good alternative? and same question SPI library already exist?

Thank's
Best resgards

zmemw16
Posts: 1582
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: SSD1963

Post by zmemw16 » Wed Dec 06, 2017 7:52 pm

same answer - github, search RA8875
https://github.com/sumotoy/RA8875
https://github.com/adafruit/Adafruit_RA8875
first cites
A library for RAiO RA8875 display driver for Teensy3.x or LC/Arduino's/Energia/Spark
second
Adafruit's Arduino driver for the RA8875 TFT driver http://www.adafruit.com/products/1590
and another 21 repos still to be looked at :D
in all of 2 minutes
srp

zmemw16
Posts: 1582
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: SSD1963

Post by zmemw16 » Wed Dec 06, 2017 10:33 pm

just spotted that i still have this page open
http://microelk.azurewebsites.net/STM32 ... 32_CZ_mini

ssd1963 based and most definitely worth a read

srp

Mavrick.J
Posts: 4
Joined: Sun Dec 03, 2017 4:31 pm

Re: SSD1963

Post by Mavrick.J » Fri Dec 08, 2017 6:13 am

Hello thank you, again at all.

I've already found these different libraries for RA8875, and if you're sure they work as is, on the stm32F103Cx, then Ok
To write the libraries is long is tedious, I just want to be sure that I can quickly test the delivered screen, and that the description is not "erroned". Can be a little laziness too :oops:

And if I read correctly, the RA8875 would be enough of several buggs, that's why I'm looking for a "ready made" solution, at least for the tests, and also for that reason that I asked for the SSD1963 that "some"announce in SPI mode


For the explanations of SSD1963, I read the documentation, but your explanation is much clearer nice job, which will be of great use, if I am obliged to make a 6080/8080 interface to SPI.

Now I have 3 options, RA8875, SSD1963 with spi interface and NEXTION :)

Regards

Post Reply