STM32F103CB ‘Sleepy mode’ and ‘Wake up’ function
[Status]
1. MCU: STM32F103CB
2. CORE1: https://github.com/rogerclarkmelbourne/Arduino_STM32
3. CORE2: https://github.com/stm32duino/Arduino_Core_STM32
hello.
We want to configure it with low power.
1. Enter ‘Sleepy Mode’ through firmware.
2. In terms of hardware, the ‘3.3V’ or ‘GND’ signal enables the ‘Wake up’ function.
3. The firmware re-enters ‘Sleepy mode’ after a certain period of time.
Are there any examples or libraries? help me.
STM32F103CB ‘Sleepy mode’ and ‘Wake up’ function
Re: STM32F103CB ‘Sleepy mode’ and ‘Wake up’ function
#include "STM32LowPower.h"
Can I use the above library? 'STM32LowPower' ?
Can I use the above library? 'STM32LowPower' ?