Bootloader updated to speed up dfu complete to sketch run time

Information on the latest releases
ag123
Posts: 663
Joined: Thu Jul 21, 2016 4:24 pm

Re: Bootloader updated to speed up dfu complete to sketch run time

Post by ag123 » Fri May 19, 2017 7:13 am

i think you have a point there, i realised that there isn't a means to tell if a board is after all a blue pill, we'd need to make do with the present state-of-art - no changes :)

vitor_boss
Posts: 34
Joined: Wed Apr 19, 2017 9:50 am

Re: Bootloader updated to speed up dfu complete to sketch run time

Post by vitor_boss » Fri Jun 09, 2017 2:30 am

The stm32flash code starts the program after flashes even on DFU mode (BOOT1==1)

https://sourceforge.net/p/stm32flash/co ... ster/tree/

User avatar
RogerClark
Posts: 6103
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Bootloader updated to speed up dfu complete to sketch run time

Post by RogerClark » Fri Jun 09, 2017 3:17 am

vitor_boss wrote:The stm32flash code starts the program after flashes even on DFU mode (BOOT1==1)

https://sourceforge.net/p/stm32flash/co ... ster/tree/
Boot1 should not be set to high when flashing via serial, as on the F103 I think this causes the upload to be put into Flash instead of RAM.

Please read STM's manuals on the STM32 for more details

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest