upload ends with error:
2022-02-14T10:35:49 WARN src/stlink-usb.c: Error -3 (Permission denied) opening ST-Link/V2 device 002:005
Error Message only with Linux, With Win 10 no erroer code . but no upload done.
Pls help
Arduino IDE und ST-Link
Re: Arduino IDE und ST-Link
First which core you used ?
Re: Arduino IDE und ST-Link
in linux
there are some udev rules like such
https://github.com/rogerclarkmelbourne/ ... v2-1.rules
that needs to go into
/etc/udev/rules.d/
for the 'official' core
https://github.com/stm32duino/Arduino_Core_STM32
you could use stm32 cube programmer as an alternative
https://www.st.com/en/development-tools ... eprog.html
there are some udev rules like such
https://github.com/rogerclarkmelbourne/ ... v2-1.rules
that needs to go into
/etc/udev/rules.d/
for the 'official' core
https://github.com/stm32duino/Arduino_Core_STM32
you could use stm32 cube programmer as an alternative
https://www.st.com/en/development-tools ... eprog.html
Re: Arduino IDE und ST-Link
fpiSTM asks: First which core you used ?
ST-Link V2
ST-Link V2