BluepillF4 PCBs

What are you developing?
User avatar
Squonk42
Posts: 323
Joined: Thu Dec 29, 2016 9:25 am
Location: Bordeaux, France

Re: BluepillF4 PCBs

Post by Squonk42 » Thu Feb 08, 2018 9:40 am

parasole wrote:
Thu Feb 08, 2018 9:06 am
Squonk42 wrote:
Wed Feb 07, 2018 8:54 am
If you are EU or US, we can ship you some bare boards for <$2 using snail mail.
Yes Squonk42, I would take two boards, I may solder quickly one board (using STM32F405RGT6) and do a basic check exept for card reader which I don't have yet...
If you are located in EU, I can send you some boards as soon as I receive them, along with some microSD Card connectors, I have a few of them. Please send me your address as PM.

parasole
Posts: 10
Joined: Tue Mar 28, 2017 3:07 am

Re: BluepillF4 PCBs

Post by parasole » Thu Feb 08, 2018 9:43 am

Yes it is in EU...

User avatar
Squonk42
Posts: 323
Joined: Thu Dec 29, 2016 9:25 am
Location: Bordeaux, France

Re: BluepillF4 PCBs

Post by Squonk42 » Thu Feb 08, 2018 9:48 am

victor_pv wrote:
Wed Feb 07, 2018 1:36 pm
The status shows "shipped" :D

Update:
Got a text from DHL, boards will arrive on Friday :D
Mines are in Pudong International Airport (Shanghai), handled by TNT, but no ETA yet.

parasole
Posts: 10
Joined: Tue Mar 28, 2017 3:07 am

Re: BluepillF4 PCBs

Post by parasole » Thu Feb 08, 2018 1:55 pm

Squonk42 wrote:
Thu Feb 08, 2018 9:48 am
Mines are in Pudong International Airport (Shanghai), handled by TNT, but no ETA yet.
Let's hope they will ship them out before weekend, next week the whole country enter to spring festival holidays...

racemaniac
Posts: 696
Joined: Sat Nov 07, 2015 9:09 am

Re: BluepillF4 PCBs

Post by racemaniac » Thu Feb 08, 2018 6:43 pm

Would anybody need it (but i'd advise to be a bit patient until we tested these boards), here is a panelized version of the bluepill f4 gerbers
Attachments
BpF4SquonkMerged.zip
(134.89 KiB) Downloaded 7 times

User avatar
Squonk42
Posts: 323
Joined: Thu Dec 29, 2016 9:25 am
Location: Bordeaux, France

Re: BluepillF4 PCBs

Post by Squonk42 » Fri Feb 09, 2018 5:52 am

parasole wrote:
Thu Feb 08, 2018 1:55 pm
Squonk42 wrote:
Thu Feb 08, 2018 9:48 am
Mines are in Pudong International Airport (Shanghai), handled by TNT, but no ETA yet.
Let's hope they will ship them out before weekend, next week the whole country enter to spring festival holidays...
Mine arrived at Liege euro hub at midnight CET, so they made it out of China before CNY!

But I doubt I will receive them today, more likely on Monday.

User avatar
Squonk42
Posts: 323
Joined: Thu Dec 29, 2016 9:25 am
Location: Bordeaux, France

Re: BluepillF4 PCBs

Post by Squonk42 » Fri Feb 09, 2018 3:26 pm

I received the PCB from AllPCB today, see this post!

victor_pv
Posts: 1864
Joined: Mon Apr 27, 2015 12:12 pm

Re: BluepillF4 PCBs

Post by victor_pv » Sat Feb 10, 2018 2:25 pm

My boards arrived yesterday.
I have to place an order for a few components that I am missing and then can reflow some.
If anyone wants to start trying with the bare boards, send me a PM with your address.
I would appreciate a paypal pay of $3 for 5 boards to offset cost ($1 stamp+envelope $2 for boards).
F103 and F405 MCUs should fit and use all pins, other MCUs may loose Pin PB11 (F411 for example), so if you want to use a different MCU check the datasheet for differences with the F405 series.

When I get the crystals and buttons from Mouser I can reflow my first.

Post Reply