Nrf24l01 on f103 board with NRF/ESP/TFT connector

Post Reply
democles9308
Posts: 5
Joined: Fri Oct 13, 2017 6:57 pm

Nrf24l01 on f103 board with NRF/ESP/TFT connector

Post by democles9308 » Sat Oct 14, 2017 10:29 am

Hello STM community! A new member from Belgium, a Linux, arduino, drone and HAM enthusiast ;)
Like many I did some projects on arduino and changed to STM. Buyed a cheap F103 ‘core’ board with dedicated nrf/esp/TFT header (viewtopic.php?f=28&t=1597).
The above link talks about my board and I’d like to know if it works with the RF24 library. It uses PB0 and PB2 as ce, cs pins. These are not the standard SPI1 pins....
my ultimate goal is to port my drone code from arduino to the STM. ( the code is based on the work of Joop brokking, a dutch guy who explains it all very well.http://www.brokking.net. I hope Some of hou can help me further. Thx already

zmemw16
Posts: 1450
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: Nrf24l01 on f103 board with NRF/ESP/TFT connector

Post by zmemw16 » Sat Oct 14, 2017 5:41 pm

peruse this thread for the details
viewtopic.php?f=28&t=2492
stephen

racemaniac
Posts: 555
Joined: Sat Nov 07, 2015 9:09 am

Re: Nrf24l01 on f103 board with NRF/ESP/TFT connector

Post by racemaniac » Sat Oct 14, 2017 5:44 pm

welcome fellow belgian :)

Post Reply