New user - creating infinity mirror

Post Reply
shahidzain67
Posts: 1
Joined: Wed Nov 08, 2017 9:42 am

New user - creating infinity mirror

Post by shahidzain67 » Wed Nov 08, 2017 11:02 am

Hi,

Although I've used C in the past I'm relatively new to programming and am just starting off on the Nucleo F401RE board. Whilst I have downloaded and configured the drivers, the device doesn't seem to be detected by the computer in any of the COM ports. I'm unsure as to whether I need to do something to the ST Link (change connectors etc) before being able to connect to it through the Arduino IDE?

Thanks!

User avatar
RogerClark
Posts: 7482
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: New user - creating infinity mirror

Post by RogerClark » Wed Nov 08, 2017 9:07 pm

Hi

For that Nucleo board, you should use STMs core github.com/stm32duino

Try posting to the STM Core section and perhaps Frederic or Carlo from STM can help you

fpiSTM
Posts: 250
Joined: Fri Sep 16, 2016 12:33 pm
Location: Le Mans, France

Re: New user - creating infinity mirror

Post by fpiSTM » Wed Nov 08, 2017 9:40 pm

Hi,
welcome.
Sure if I can help.

Post Reply