ZhaisRudi: Hello world

Post Reply
ZhaisRudi
Posts: 4
Joined: Sun Jan 14, 2018 7:37 am

ZhaisRudi: Hello world

Post by ZhaisRudi » Sun Jan 14, 2018 7:43 am

Hi... I'm ZhaisRudi from Indonesia
I hope I can learn stm32duino here...
Thanks....

User avatar
mrburnette
Posts: 2216
Joined: Mon Apr 27, 2015 12:50 pm
Location: Greater Atlanta
Contact:

Re: Hello world

Post by mrburnette » Mon Jan 15, 2018 12:11 am

Welcome to the forum.
If you already have Arduino experience, you will learn without too much difficulty.

This info may be helpful:
http://stm32duino.com/viewtopic.php?f=2&t=3073#p39605

Ray

ZhaisRudi
Posts: 4
Joined: Sun Jan 14, 2018 7:37 am

Re: ZhaisRudi: Hello world

Post by ZhaisRudi » Sun Feb 18, 2018 9:11 am

Thanks sir,
Can we use UNO library for this one?

User avatar
mrburnette
Posts: 2216
Joined: Mon Apr 27, 2015 12:50 pm
Location: Greater Atlanta
Contact:

Re: ZhaisRudi: Hello world

Post by mrburnette » Tue Feb 20, 2018 12:44 am

ZhaisRudi wrote:
Sun Feb 18, 2018 9:11 am
Thanks sir,
Can we use UNO library for this one?
In general, libraries written for Atmel AVR microcontrollers (ex: low-power, sleep) will require porting. Therefore, many of the hacks up on Arduino.cc may fail.

Libraries from Adafruit, SparkFun, Teensy may work without modification and in my experience any required mods are straight-forward.

A Google search will provide a few other references: https://www.google.com/search?q=library ... 2duino.com

Ray

ZhaisRudi
Posts: 4
Joined: Sun Jan 14, 2018 7:37 am

Re: ZhaisRudi: Hello world

Post by ZhaisRudi » Tue Feb 20, 2018 6:36 pm

In case I just need midi.h library for my project,
Can I use it?

User avatar
mrburnette
Posts: 2216
Joined: Mon Apr 27, 2015 12:50 pm
Location: Greater Atlanta
Contact:

Re: ZhaisRudi: Hello world

Post by mrburnette » Wed Feb 21, 2018 2:16 am

ZhaisRudi wrote:
Tue Feb 20, 2018 6:36 pm
In case I just need midi.h library for my project,
Can I use it?
My crystal ball is not working tonight... but Google is up:
https://www.google.com/search?q=midi+si ... 2duino.com

Ray

ZhaisRudi
Posts: 4
Joined: Sun Jan 14, 2018 7:37 am

Re: ZhaisRudi: Hello world

Post by ZhaisRudi » Thu Feb 22, 2018 8:17 am

Ok sir I got it... Thanks

Post Reply