OSX 10.9 Maple Mini Ardunio 1.6.5 libusb-1.0.0.dylib

Apple Mac OSX
DaveCalaway
Posts: 3
Joined: Tue Jan 17, 2017 8:26 pm

Re: OSX 10.9 Maple Mini Ardunio 1.6.5 libusb-1.0.0.dylib

Post by DaveCalaway » Wed Jan 18, 2017 9:44 pm

UPDATE

I upgraded the bootloader to 2.0, this is the result on Arduino. I left the IDE with the same setting above:

Code: Select all

dfu-util 0.9
dfu-util: Invalid DFU suffix signature

dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

Deducing device DFU version from functional descriptor length
Opening DFU capable USB device...
ID 1eaf:0003
Run-time device DFU version 0110
Claiming USB DFU Interface...
Setting Alternate Setting #2 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0110
Device returned transfer size 1024
Copying data from PC to DFU device

Download	[                         ]   0%            0 bytes
Download	[=                        ]   7%         1024 bytes
Download	[===                      ]  14%         2048 bytes
Download	[=====                    ]  22%         3072 bytes
Download	[=======                  ]  29%         4096 bytes
Download	[=========                ]  37%         5120 bytes
Download	[===========              ]  44%         6144 bytes
Download	[============             ]  51%         7168 bytes
Download	[==============           ]  59%         8192 bytes
Download	[================         ]  66%         9216 bytes
Download	[==================       ]  74%        10240 bytes
Download	[====================     ]  81%        11264 bytes
Download	[======================   ]  88%        12288 bytes
Download	[======================== ]  96%        12796 bytes
Download	[=========================] 100%        12796 bytes
Download done.
state(8) = dfuMANIFEST-WAIT-RESET, status(0) = No error condition is present
Done!
Resetting USB to switch back to runtime mode

Post Reply