I have Arduino 1.6.5 running OK on Ubuntu 14.04 and uploading to Maple Mini.
As I have not been working much on the Maple recently, I would like to ask a couple of questions:
1. Is there any way to have auto-reset work for the Maple like it does for other Ardunino boards, so that its not neccessary to set the Maple to Perpetual Bootloader Mode before sketch upload, and then perform manual reset after sketch upload to start the sketch running?
2. How long are other Linux users finding that the upload process takes with DFU? Even a simple sketch takes ~10 seconds for me. Is that normal? (output below)
Code: Select all
Sketch uses 12,556 bytes (11%) of program storage space. Maximum is 110,592 bytes. Global variables use 3,104 bytes of dynamic memory. dfu-util 0.8 dfu-util: Invalid DFU suffix signature Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. dfu-util: A valid DFU suffix will be required in a future dfu-util release!!! Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to email@example.com Opening DFU capable USB device... ID 1eaf:0003 Run-time device DFU version 0110 Claiming USB DFU Interface... Setting Alternate Setting #1 ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing DFU mode device DFU version 0110 Device returned transfer size 1024 Copying data from PC to DFU device Download [ ] 0% 0 bytes Download [= ] 7% 1024 bytes Download [=== ] 15% 2048 bytes Download [===== ] 22% 3072 bytes Download [======= ] 30% 4096 bytes Download [========= ] 37% 5120 bytes Download [=========== ] 45% 6144 bytes Download [============= ] 52% 7168 bytes Download [=============== ] 60% 8192 bytes Download [================ ] 67% 9216 bytes Download [================== ] 75% 10240 bytes Download [==================== ] 82% 11264 bytes Download [====================== ] 90% 12288 bytes Download [======================== ] 97% 12556 bytes Download [=========================] 100% 12556 bytes Download done. state(8) = dfuMANIFEST-WAIT-RESET, status(0) = No error condition is present Done!