Driving LED dim/glow using PWM pins and MOSFET

Generic boards that are not Maple or Maple mini clones, and don't contain the additional USB reset hardware
stevestrong
Posts: 1824
Joined: Mon Oct 19, 2015 12:06 am
Location: Munich, Germany

Re: Driving LED dim/glow using PWM pins and MOSFET

Post by stevestrong » Tue Dec 05, 2017 9:48 am

Have you measured the voltage on the output pins for full brightness?

stanleyseow
Posts: 52
Joined: Sun Sep 27, 2015 3:26 am
Location: Kuala Lumpur, Malaysia
Contact:

Re: Driving LED dim/glow using PWM pins and MOSFET

Post by stanleyseow » Tue Dec 05, 2017 3:36 pm

Good idea, will plug into power supply into MOSFET and slowly increase the voltage ...
[edited]

I turns on at 3.1V and turn off at 0.9V as per my power supply voltage readings ..
Stanley
9W2SVT / N5SVT

Post Reply