F103RET6

Generic boards that are not Maple or Maple mini clones, and don't contain the additional USB reset hardware
User avatar
JensEP
Posts: 22
Joined: Mon Apr 27, 2015 4:39 pm
Location: Copenhagen, Denmark

F103RET6

Postby JensEP » Thu Dec 29, 2016 3:36 pm

--
Jens

80 GPIO ought to be enough for anybody

evildave_666
Posts: 27
Joined: Mon Apr 27, 2015 11:20 pm

Re: F103RET6

Postby evildave_666 » Fri Dec 30, 2016 5:32 am

This module is actually a daughterboard to a carrier that has ESP-01, NRF, and a few other types of ports.

User avatar
RogerClark
Posts: 5543
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: F103RET6

Postby RogerClark » Fri Dec 30, 2016 9:55 am

the F103RET is quite a good device, its just a shame that its not available on more boards.

It has DAC, SDIO etc etc and more Flash and more RAM than the F103RB

acronis
Posts: 10
Joined: Thu Mar 02, 2017 12:32 pm

Re: F103RET6

Postby acronis » Thu Mar 02, 2017 12:49 pm

Good afternoon . Suitable for this Board F103RET6
viewtopic.php?f=28&t=1662
(https://ru.aliexpress.com/item/STM32F10 ... 0.0.nfSy6M)
 this loader generic_boot20_pc13.bin
(https://github.com/rogerclarkmelbourne/ ... 1/binaries)
or need some other ?

victor_pv
Posts: 1228
Joined: Mon Apr 27, 2015 12:12 pm

Re: F103RET6

Postby victor_pv » Thu Mar 02, 2017 2:37 pm

acronis wrote:Good afternoon . Suitable for this Board F103RET6
viewtopic.php?f=28&t=1662
(https://ru.aliexpress.com/item/STM32F10 ... 0.0.nfSy6M)
 this loader generic_boot20_pc13.bin
(https://github.com/rogerclarkmelbourne/ ... 1/binaries)
or need some other ?


Should work as far as uploading sketches, but you need to check if the LED is connected to PC13 or not. Looks like there are 2 leds, a power one, and LED2 to the left of the BOOT jumpers. If it's not on PC13, the led will just not blink to indicate when the bootloader is active, but should still download sketches just fine.

acronis
Posts: 10
Joined: Thu Mar 02, 2017 12:32 pm

Re: F103RET6

Postby acronis » Tue Mar 07, 2017 2:41 pm

Thank you! Everything works fine on ret6!


Return to “Generic STM32F103”

Who is online

Users browsing this forum: No registered users and 5 guests