[SOLVED] stm32f303 - warning: changing start of section .text by 8 bytes

STM32F103 Nucleo boards e.g. STM Nucleo F103RB
FRANCISCOGIMENO
Posts: 38
Joined: Wed Nov 08, 2017 12:30 pm

Re: stm32f303 - warning: changing start of section .text by 8 bytes

Post by FRANCISCOGIMENO » Wed Nov 08, 2017 10:02 pm

Well, the board is the stm32f303 and the program compiled in an arduino micro compiles without problems.

fpiSTM
Posts: 250
Joined: Fri Sep 16, 2016 12:33 pm
Location: Le Mans, France

Re: stm32f303 - warning: changing start of section .text by 8 bytes

Post by fpiSTM » Thu Nov 09, 2017 8:29 am

Ok. This topic has been solved. please mark this one as [SOLVED]
New issue here:http://stm32duino.com/viewtopic.php?f=29&t=2819

FRANCISCOGIMENO
Posts: 38
Joined: Wed Nov 08, 2017 12:30 pm

Re: stm32f303 - warning: changing start of section .text by 8 bytes

Post by FRANCISCOGIMENO » Thu Nov 09, 2017 8:40 am

Hello again, after compiling again without changing anything else
it seems that the 4-bit message no longer appears.

What weird things.

:shock: :shock: :shock:

Thank you so much for everything

fpiSTM
Posts: 250
Joined: Fri Sep 16, 2016 12:33 pm
Location: Le Mans, France

Re: [SOLVED] stm32f303 - warning: changing start of section .text by 8 bytes

Post by fpiSTM » Thu Nov 09, 2017 10:15 am

FYI, I've made a PR to Fix all the warning:
https://github.com/stm32duino/Arduino_C ... 2/pull/149

I will launch a full build this night to see if all are corrected. In my current built, I have no .bss alignment issue.

Post Reply