Unique MAC address for a custom board

If you made your own board, post here, unless you built a Maple or Maple mini clone etc
Post Reply
mattia424
Posts: 6
Joined: Fri Sep 09, 2022 8:34 am

Unique MAC address for a custom board

Post by mattia424 »

I have developed a board based on STM32F429ZI and LAN8742A and now I should make sure to assign the mac address, what is the best way to do it?
The purchase of a block of mac addresses from the issuing body and the relative association seems to me a very difficult process to implement (due to the costs and how to assign them one by one).
Browsing the internet the only solution I found is to install the SST26VF032BT chip and then read its MAC address already assigned, could this be the fastest and least expensive solution?
Thanks for the advice
Post Reply

Return to “Custom design boards”