How to? USART1 with Hardware flow control (ArduinoISP)

Post here first, or if you can't find a relevant section!
Post Reply
l0lhaxx
Posts: 3
Joined: Mon Nov 27, 2017 7:12 am

How to? USART1 with Hardware flow control (ArduinoISP)

Post by l0lhaxx » Mon Nov 27, 2017 7:29 am

Hello guys,
i need to send some data over the USART1 of my STM32F103C. However, I have not found a way to do this with hardware flow control (using RTS / CTS). With the standard STM HAL libary there were no problems. Is there any possibility to use the hardware flow control with the ArduinoISP? I would be very happy to receive suggestions for solutions. Thanks!

l0lhaxx
Posts: 3
Joined: Mon Nov 27, 2017 7:12 am

Re: How to? USART1 with Hardware flow control (ArduinoISP)

Post by l0lhaxx » Wed Nov 29, 2017 4:00 pm

Nobody can help?

User avatar
mrburnette
Posts: 2034
Joined: Mon Apr 27, 2015 12:50 pm
Location: Greater Atlanta
Contact:

Re: How to? USART1 with Hardware flow control (ArduinoISP)

Post by mrburnette » Wed Nov 29, 2017 4:50 pm

The CTS/RTS discussion began around this post: viewtopic.php?t=1027&start=90#p14347

I have not diff'd the older libmaple with the current one, lots of work has been done on serial functionality by members here.
However, here is a discussion on how flowcontrol was implemented back in the original library:

http://forums.leaflabs.com/forums.leafl ... ml?id=2372


Ray

Post Reply