Board loses program after boot

Post here first, or if you can't find a relevant section!
User avatar
RogerClark
Posts: 7683
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Board loses program after boot

Post by RogerClark » Fri Jan 12, 2018 9:42 pm

Its no solved.

I gave up using the board which had the problem, I suspected it was faulty.

You could try posting to STM's own community forum as this is a general question about their processors not the Arduino core

(Or you could try compiling using something completely different e.g. Atollic TrueStudio and see if you get the same problem

User avatar
Pito
Posts: 1739
Joined: Sat Mar 26, 2016 3:26 pm
Location: Rapa Nui

Re: Board loses program after boot

Post by Pito » Sat Jan 13, 2018 12:06 am

Do we have schematics?
Provided you messed the boot0/1 wiring such you set both 1 somehow, you set the start/boot from sram, which is empty after power off/on.. :)
Pukao Hats Cleaning Services Ltd.

Post Reply