Page 2 of 2

Re: Board loses program after boot

Posted: Fri Jan 12, 2018 9:42 pm
by RogerClark
Its no solved.

I gave up using the board which had the problem, I suspected it was faulty.

You could try posting to STM's own community forum as this is a general question about their processors not the Arduino core

(Or you could try compiling using something completely different e.g. Atollic TrueStudio and see if you get the same problem

Re: Board loses program after boot

Posted: Sat Jan 13, 2018 12:06 am
by Pito
Do we have schematics?
Provided you messed the boot0/1 wiring such you set both 1 somehow, you set the start/boot from sram, which is empty after power off/on.. :)