STLink-v2 + stm32f103 blue + GDB

tiger762
Posts: 22
Joined: Tue Jan 26, 2016 11:40 pm

STLink-v2 + stm32f103 blue + GDB

Postby tiger762 » Wed Mar 15, 2017 9:41 pm

Hello!

Trying to debug a complex script I have running on the stm32f103. I program it with an STLink-v2 fine.

Downloaded and compiled Texane's st-util

I start it, get the "listening on 4242" message

Code: Select all

2017-03-15T17:34:59 INFO src/gdbserver/gdb-server.c: Listening at *:4242...


I start the ARM GDB

tar extended-remote :4242

in the st-util window it detects that GDB has connected to it

Code: Select all

2017-03-15T17:35:42 INFO src/gdbserver/gdb-server.c: GDB connected.


At this point, it is only marginally useful. A stack trace always shows the same bullcrap:

Code: Select all

(gdb) bt
#0  0x1ffff020 in ?? ()
#1  0xffffffff in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)


I am suspect of what it reports the program counter:

Code: Select all

(gdb) print $pc
$1 = (void (*)(void)) 0x1ffff020


It is always that value. Dumps of memory seem to work:

Code: Select all

(gdb) x/32x 0x08000000
0x8000000 <__stm32_vector_table>:   0x20005000   0x08000e55   0x08000fdd   0x08000fdd
0x8000010 <__stm32_vector_table+16>:   0x08000fdd   0x08000fdd   0x08000fdd   0x08000fdd
0x8000020 <__stm32_vector_table+32>:   0x08000fdd   0x08000fdd   0x08000fdd   0x08000fdd
0x8000030 <__stm32_vector_table+48>:   0x08000fdd   0x08000fdd   0x08000fdd   0x08001435
0x8000040 <__stm32_vector_table+64>:   0x08000fdd   0x08000fdd   0x08000fdd   0x08000fdd
0x8000050 <__stm32_vector_table+80>:   0x08000fdd   0x08000fdd   0x08000491   0x08000fdd
0x8000060 <__stm32_vector_table+96>:   0x08000fdd   0x08000fdd   0x08000fdd   0x080004bd
0x8000070 <__stm32_vector_table+112>:   0x08000fdd   0x080004fd   0x08000fdd   0x08000fdd


But what I really need to do is when the stm32f103 has driven off into the woods, start the debugger and at least get a real program counter address that I can then take to an objdump output and figure out what while() loop it is likely stuck in.

Any help appreciated!

Return to “STLink”

Who is online

Users browsing this forum: No registered users and 2 guests