[SOLVED] Uploading via STLink-v2 problem

stevestrong
Posts: 2048
Joined: Mon Oct 19, 2015 12:06 am
Location: Munich, Germany
Contact:

Re: Uploading via STLink-v2 problem

Post by stevestrong » Thu Jan 04, 2018 10:06 pm

You have to upload over USB DFU a simple (blinky) sketch built with compiler option

Code: Select all

-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1
inserted at the end of line 374.

Or you can try to upload via STLink but then press the reset button on the board right after Arduino IDE has completed to build the project and starts to upload. Precise timing is necessary here.

peeknot
Posts: 24
Joined: Thu Dec 14, 2017 3:08 pm

Re: Uploading via STLink-v2 problem

Post by peeknot » Fri Jan 05, 2018 4:58 am

stevestrong wrote:
Thu Jan 04, 2018 10:06 pm
Or you can try to upload via STLink but then press the reset button on the board right after Arduino IDE has completed to build the project and starts to upload. Precise timing is necessary here.
Yay solved , thanks steve

Best Regards

Kevin

Post Reply