Simple guide to make BMP on Baite?

Post Reply
Nutsy
Posts: 260
Joined: Sun Jul 24, 2016 4:26 pm

Simple guide to make BMP on Baite?

Post by Nutsy » Mon Jan 22, 2018 11:32 am

Hi i must admit ive been doing a fair bit of reading of the topics here... And im still none the wiser...

So I've gathered its possible to make a BMP from a Baite Maple mini. But from possible finding some prebuilt firmware, I dont know how to make it work?

I guess what im after is a straight forward guide to making one?

Or at the least a pinout for the Baite maple version of the probe?

Out of interest though, does a BMP provide full jtag? Or is it a simplified firmware only like the stlink?

zmemw16
Posts: 1687
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: Simple guide to make BMP on Baite?

Post by zmemw16 » Mon Jan 22, 2018 12:37 pm

i put 'black magic probe' in the search box and 368 entries
viewtopic.php?f=37&t=2802&hilit=black+magic+probe

then i added 'bin' 32 entries
viewtopic.php?f=37&t=1723&p=22635&hilit ... bin#p22635

and then inspiration struck, added 'zip'
viewtopic.php?f=37&t=122&p=989&hilit=bl ... n+zip#p989

ok i quite like the thing, CubeMX - pick a chip, almost any chip and cycle through the debug option under the sys device, it hi-lights the pins being used in each mode, for serial trace 3 wire mode?
it will also generate the hardware initialisation and release call as boilerplate code, useful for addresses, masks and values.
easier maybe than reading the data sheet and the PM/RM pdf's.

stephen

User avatar
mrburnette
Posts: 2232
Joined: Mon Apr 27, 2015 12:50 pm
Location: Greater Atlanta
Contact:

Re: Simple guide to make BMP on Baite?

Post by mrburnette » Mon Jan 22, 2018 12:39 pm

Nutsy:

viewtopic.php?t=1723

As a start ... the Blue Pill ... is the recommended board and it may require modifications. In my mind, you may have to gut the USB on the MM to get BMP to work.

Ray

zmemw16
Posts: 1687
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: Simple guide to make BMP on Baite?

Post by zmemw16 » Mon Jan 22, 2018 12:46 pm

:lol: intention :lol:
ok just give the man the fish, me fishing rod and tackle, not quite the right baite though
:lol: :lol:

User avatar
Rick Kimball
Posts: 1079
Joined: Tue Apr 28, 2015 1:26 am
Location: Eastern NC, US
Contact:

Re: Simple guide to make BMP on Baite?

Post by Rick Kimball » Mon Jan 22, 2018 2:34 pm

Nutsy wrote:
Mon Jan 22, 2018 11:32 am
So I've gathered its possible to make a BMP from a Baite Maple mini. But from possible finding some prebuilt firmware, I dont know how to make it work?
You shouldn't waste your time with a Baite MM port unless you are in it for the educational value. Just buy a blackpill and load the binary found here: viewtopic.php?f=37&t=2801
Nutsy wrote:
Mon Jan 22, 2018 11:32 am
Out of interest though, does a BMP provide full jtag? Or is it a simplified firmware only like the stlink?
Yes. However, I'm not sure what you gain as it uses a lot more pins and recent changes to Roger's core will cause you nothing but grief in trying to use it.
-rick

Post Reply