Olimexino-STM32

Maple Mini, Maple Rev3, Maple Rev 5 and Maple Ret 6, iTead Maple etc
katesfb
Posts: 3
Joined: Mon Oct 09, 2017 1:21 am

Re: Olimexino-STM32

Post by katesfb » Mon Oct 09, 2017 1:46 am

Hi,
What is the correct board option to use with the olimexino-STM32. In Arduino under the boards manager with subsection STM32 boards (stm32duino.com) there are a few options that seem relevant to the olimexino. I have been using Maple (rev3), is this correct as not all examples seem to work.

Any help is much appreciated.

Cheers.

User avatar
RogerClark
Posts: 6908
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Olimexino-STM32

Post by RogerClark » Mon Oct 09, 2017 6:14 am

What MCU is on the board ? F103RC ??

Does it have come with the bootloader installed ?

katesfb
Posts: 3
Joined: Mon Oct 09, 2017 1:21 am

Re: Olimexino-STM32

Post by katesfb » Sun Oct 15, 2017 10:29 pm

Hi,
And thanks for the reply.

The MCU is stm32F103RBT6.

It looks like it comes with the maple boot-loader installed as is mentioned here https://www.olimex.com/Products/Duino/S ... e-hardware

Any help is much appreciated.

Cheers.

User avatar
RogerClark
Posts: 6908
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Olimexino-STM32

Post by RogerClark » Mon Oct 16, 2017 4:18 am

Not all examples work with all boards

The F103RB is just a larger F103C with a few more pins, it doesnt have things like DAC that the F103RE or VE or ZE has etc

Also, unless someone reports a compile issue with an example I have no way of knowing that it doesnt work, as its impractical for me to test every example for every change to the master repo

User avatar
Manny
Posts: 40
Joined: Wed Dec 09, 2015 3:15 pm

Re: Olimexino-STM32

Post by Manny » Mon Oct 16, 2017 7:26 am

I use Maple (rev3) with the the stm32duino bootloader option which is much better than the one the board comes with.

Post Reply