victor_pv wrote: ↑
Wed Jul 12, 2017 7:24 pm
If you are using the libmaple based one, then pwmWrite should be what you look for.
If you are using one of the other cores, then it depends what's implemented on them.
I am not the end user of the libraries. I am adding support for (hopefully all) STM32 boards in Visuino. I am simply testing the functionality, and it will be used by the Visuino https://www.visuino.com
users (At the moment 22742 registered users with about new 100 registering daily ), so I need a solution that will easily work for everyone.
One of the users is volunteering to also write Wiki documentation on the stm32duino support, so I am trying to figure out how it all should work.
I am quite new on the stm32duino, I have been adding support for many of the other controllers, including the Arduino boards, Femto IO, PIC chipKIT, ESP8266, ESP32, FreSoC2, LinkIt One, Arduino 101, NRF52832, and many others, so I try to make sure they are all well supported by Visuino. I am trying to do the same for the stm32duino boards. Already added initial Maple Mini support, but still looking if it needs tweaking/improving.
I have couple of other ST boards, and will be fighting with them again, as soon as I find another gap. (Adding some I2C modules to Visuino now...)
Please give me a good direction as to how best to support the stm32duino, and what is the recommended repository/board manager file to use, for all the Visuino users.