Firmata for a Maple Mini

Maple Mini, Maple Rev3, Maple Rev 5 and Maple Ret 6, iTead Maple etc
Post Reply
aramperez
Posts: 13
Joined: Thu May 12, 2016 1:34 am

Firmata for a Maple Mini

Post by aramperez » Fri Jan 19, 2018 4:06 pm

Is there a version of Firmata for a Maple Mini (as opposed to a Nucleo board)?

Thanks,
Aram

User avatar
mrburnette
Posts: 2232
Joined: Mon Apr 27, 2015 12:50 pm
Location: Greater Atlanta
Contact:

Re: Firmata for a Maple Mini

Post by mrburnette » Fri Jan 19, 2018 8:46 pm

Aram,

It has been over 12 months since Firmata has been discussed and to my knowledge the port was not completed; see here.
viewtopic.php?f=15&t=463&start=30#p20894

Now that Frédéric has Firmata working for Neucleo, the clone boards should be straightforward - hopefully.
https://github.com/stm32duino/wiki/wiki/Firmata-example

If any members has Firmata working for Maple, clone, or blue boards, please chime in here.

Ray

aramperez
Posts: 13
Joined: Thu May 12, 2016 1:34 am

Re: Firmata for a Maple Mini

Post by aramperez » Fri Jan 19, 2018 11:02 pm

Ok, hopefully someone will chime in. I'll take a look at the links (I was asking a similar question in the thread of the first link).

Thanks,
Aram

fpiSTM
Posts: 321
Joined: Fri Sep 16, 2016 12:33 pm
Location: Le Mans, France

Re: Firmata for a Maple Mini

Post by fpiSTM » Fri Jan 19, 2018 11:20 pm

Right, i've made the port for stm core. I thought it was done for leaflabs core.
Anyway, it should be easy to do it, I think. On the other side, I have to add Maple and Blue pill to stm core.
Will do a minimal one in the coming weeks

Post Reply