AnalogLamb's New STM32F405RG Board - Too Much Like Teensy, but More Power

Limited support for STM32F4 Discovery, Nucleo and custom F4 boards
Post Reply
User avatar
AnalogLamb
Posts: 46
Joined: Fri Jul 15, 2016 7:38 am
Location: Beijing
Contact:

AnalogLamb's New STM32F405RG Board - Too Much Like Teensy, but More Power

Post by AnalogLamb » Mon Sep 19, 2016 9:44 am

Hi Everyone,

This is Our new STM32F405RG board, I would like to share with you. I want to use the post to record the development process of our new F405 board.
Let me introduce it!

Micro-controller STM32F405RG - 168Mhz,1MB Flash, 192K RAM, 2DAC, support SDIO,Camera interface and Ethernut MAC ( Teensy 3.2 usesMK20DX256VLH7 - 72MHz, 256K Flash, 64K RAM, 1 DAC, like STM32F103 ).
Four layers board - Top, PWR, GND, Bottom
1.5 x 0.7 Inch - Teensy 3.2 size is 1.4 x 0.7 in.
1 x LDO
1 x FPC Connector( SDIO,DAC, ADC, UART, Camera Interface)

I think the board hardware is better than Teensy, but Teensy's Arduino Software is better than STM32F405 board's.

So Who want to develop Arduino cores and libraries of STM32F405? I ( [url]https:www.analoglamb.com[/url]) will support you with our hardware. Now I know Koduino is an open source libraries which support STM32F405. http://avikde.me/koduino/html/index.html

Image
AnalogLamb.Com - STM32Duino for Everyone

ag123
Posts: 719
Joined: Thu Jul 21, 2016 4:24 pm

Re: AnalogLamb's New STM32F405RG Board - Too Much Like Teensy, but More Power

Post by ag123 » Thu Apr 13, 2017 10:32 am

hi analoglamb,
please provide the schematics for your board, e.g. in PDF format
it didn't seem available on your product page as of this post
https://www.analoglamb.com/product/seeduino-stm32f405/
without which it is difficult to evaluate how to use the board

Post Reply