How to access low level registers or How to set TIM1 to 128Mhz

Post here first, or if you can't find a relevant section!
dannyf
Posts: 447
Joined: Sat Jul 04, 2020 7:46 pm

Re: How to access low level registers or How to set TIM1 to 128Mhz

Post by dannyf »

the clock may run at 128Mhz but the PWM runs at much lower frequency: for 8-bit resolution, the PWM is 128M / 256 = 500Khz. or 128K @ 10-bit resolution...
Post Reply

Return to “General discussion”