New ST Nucleo's, Arduino Nano form factor

Limited support for STM32F3 based boards, e.f STM Discovery and Nucleo line
madias
Posts: 813
Joined: Mon Apr 27, 2015 11:26 am
Location: Vienna, Austria

Re: New ST Nucleo's, Arduino Nano form factor

Post by madias » Thu Oct 22, 2015 10:25 am

hmmm, I think the nucleo boards are using the most recent ST-Link (ST Link v2.1) As I can remember there was a problem with texane and STM32F3 and STM32F4 chips...

User avatar
sheepdoll
Posts: 236
Joined: Fri May 22, 2015 12:58 am
Location: Silicon Valley Vortex
Contact:

Re: New ST Nucleo's, Arduino Nano form factor

Post by sheepdoll » Thu Oct 22, 2015 5:04 pm

RogerClark wrote:Ah
It must be the newer boards possibly not the Nucleo
Most of the HALMX work I have done is with an older Nucleo on Mac. I have not had any real issues with the ST link or the tools I inherited from the main project here.

There are some configurations, Well documented here that require some hardware mods to get an external clock. I think the newer boards have this crystal installed.

User avatar
RogerClark
Posts: 7422
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: New ST Nucleo's, Arduino Nano form factor

Post by RogerClark » Thu Oct 22, 2015 7:36 pm

OK.

I definitely recall issues with Texane STLink and STLink devices on some ST boards.

But perhaps, this was actually User Error...

jcw
Posts: 171
Joined: Mon Oct 26, 2015 8:16 am

Re: New ST Nucleo's, Arduino Nano form factor

Post by jcw » Thu Oct 29, 2015 10:16 pm

There's a firmware upgrade for the ST-Link 2.1 on Nucleo boards. It also includes a Java-based version which works on Mac: http://www.st.com/web/en/catalog/tools/PF260217

User avatar
RogerClark
Posts: 7422
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: New ST Nucleo's, Arduino Nano form factor

Post by RogerClark » Fri Oct 30, 2015 12:46 am

@jcw

OK. Thanks, thats good to know, in case we have any other issues with STlink and Texane/Stlink (open source STlink util)

gbulmer
Posts: 67
Joined: Wed Sep 23, 2015 12:04 am
Location: UK

Re: New ST Nucleo's, Arduino Nano form factor

Post by gbulmer » Sat Oct 31, 2015 12:24 am

RogerClark wrote:@jcw

OK. Thanks, thats good to know, in case we have any other issues with STlink and Texane/Stlink (open source STlink util)
IIRC, the Java version is purely for updating the ST-Link firmware on Nucleo's, it isn't a replacement for Texane/Stlink.

User avatar
RogerClark
Posts: 7422
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: New ST Nucleo's, Arduino Nano form factor

Post by RogerClark » Sat Oct 31, 2015 2:22 am

@gbulmer

Thanks.

Post Reply