Problem with Arduino IDE and STM32F103C

Development environment specific, Arduino, Eclipse, VS2013,Em::Blocks etc
rsc
Posts: 5
Joined: Thu Oct 06, 2016 12:03 pm

Problem with Arduino IDE and STM32F103C

Postby rsc » Mon Oct 10, 2016 2:50 am

Hi all! I'm new with STM32(I come from pic micro's) after follow the steps for installing stm32 in arduino IDE on linux, I can't compile on board "Generic STM32F103C"
the output compiler is

Code: Select all

fork/exec /bin/arm-none-eabi-g++: no such file or directory

regards

User avatar
Rick Kimball
Posts: 722
Joined: Tue Apr 28, 2015 1:26 am
Location: Eastern NC, US
Contact:

Re: Problem with Arduino IDE and STM32F103C

Postby Rick Kimball » Mon Oct 10, 2016 4:33 am

https://github.com/rogerclarkmelbourne/ ... on#all-oss

Step 2:

"Run the IDE, and on the Tools menu, select the Boards manager, and install the Arduino Zero from the list of available boards. You must do this step, it installs the arm-none-eabi-g++ toolchain!"
-rick

rsc
Posts: 5
Joined: Thu Oct 06, 2016 12:03 pm

Re: Problem with Arduino IDE and STM32F103C

Postby rsc » Mon Oct 10, 2016 2:23 pm

now is working! thanks, I've forgotten step 2

User avatar
RogerClark
Posts: 5465
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Problem with Arduino IDE and STM32F103C

Postby RogerClark » Mon Oct 10, 2016 9:24 pm

I added a specific FAQ for this, as its cropped up 2 or 3 times recently.

( Not that anyone reads the FAQ either ;-)

edogaldo
Posts: 166
Joined: Fri Jun 03, 2016 8:19 am

Re: Problem with Arduino IDE and STM32F103C

Postby edogaldo » Tue Oct 11, 2016 8:55 am

RogerClark wrote:I added a specific FAQ for this, as its cropped up 2 or 3 times recently.

( Not that anyone reads the FAQ either ;-)

What about putting the FAQ in a dedicated "FAQ" section within the main forum? Probably it's not intuitive enough having them in the "Welcome" section.
Also I'd suggest to add an explicit link to the wiki within the forum header.
Last edited by edogaldo on Tue Oct 11, 2016 8:58 am, edited 1 time in total.

User avatar
RogerClark
Posts: 5465
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Problem with Arduino IDE and STM32F103C

Postby RogerClark » Tue Oct 11, 2016 8:58 am

I changed the title to "Welcome and FAQs"

stevestrong
Posts: 722
Joined: Mon Oct 19, 2015 12:06 am
Location: Munich, Germany

Re: Problem with Arduino IDE and STM32F103C

Postby stevestrong » Tue Oct 11, 2016 9:08 am

+1 for putting the FAQ on wiki, gihub or wiki.stm32duino.

User avatar
RogerClark
Posts: 5465
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Problem with Arduino IDE and STM32F103C

Postby RogerClark » Tue Oct 11, 2016 9:58 am

Steve

Please feel free to copy and paste it in ;-)

I can change the existing forum page to reference the wiki page

edogaldo
Posts: 166
Joined: Fri Jun 03, 2016 8:19 am

Re: Problem with Arduino IDE and STM32F103C

Postby edogaldo » Tue Oct 11, 2016 10:06 am

A couple of suggestions about the wiki:
  • I think it would deserve better visibility within the forum
  • Would it be possible to improve the Navigation experience within the sidebar? At the moment there is only a link to the start page and a bunch of "technical" links not very friendly for content navigation..

User avatar
RogerClark
Posts: 5465
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Problem with Arduino IDE and STM32F103C

Postby RogerClark » Tue Oct 11, 2016 10:36 am

The Wiki uses MediaWiki (same as Wikipedia), so I can install any standard Mediawiki plugin.

So please let me know if you have any specific suggestions and have a link about how to implement etc.

Note. I find with Mediwiki that it does not have a good UI to make configuration changes, most changes are by editing PHP files e.g. localsettings.php , and by copying plugin's into folders etc


Return to “IDE's”

Who is online

Users browsing this forum: No registered users and 2 guests