STM32F103C8 + FT811 Screen + SD Card Reader

External hardware connected to the STM32 board
Post Reply
RndMnkIII
Posts: 1
Joined: Mon Jul 17, 2017 9:54 pm

STM32F103C8 + FT811 Screen + SD Card Reader

Post by RndMnkIII » Mon Jul 17, 2017 10:14 pm

Hello, this is a proof of concept for show the performance that can be obtained with a "modest"
STM32F103C8 microcontroller and a FT811 hardware accelerated screen. Each device is attached to individual SPI bus using at the same time both buses.Also I,ve Attached a DS3231 RTC only for use of the AT24C32 eeprom included with it, using i2c bus, for store the calibration of tactile FT811 screen.


https://youtu.be/b4WuedKi2hE

The FT8XX Team

zmemw16
Posts: 1265
Joined: Wed Jul 08, 2015 2:09 pm
Location: St Annes, Lancs,UK

Re: STM32F103C8 + FT811 Screen + SD Card Reader

Post by zmemw16 » Mon Jul 17, 2017 11:58 pm

nice psu, for the screen i take it :D
can you detail the sdcard module? curious if it's got resistors etc
stephen

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest