Wur doomed... I tell you... aye... doomed...

Anything not related to STM32
Post Reply
User avatar
ahull
Posts: 1650
Joined: Mon Apr 27, 2015 11:04 pm
Location: Sunny Scotland
Contact:

Wur doomed... I tell you... aye... doomed...

Post by ahull » Tue May 23, 2017 10:58 pm

Just in case you missed it...

http://hackaday.com/2017/05/22/doomed-thermostat/

... and for those not familiar with the line...



:D
- Andy Hull -

User avatar
sheepdoll
Posts: 236
Joined: Fri May 22, 2015 12:58 am
Location: Silicon Valley Vortex
Contact:

Re: Wur doomed... I tell you... aye... doomed...

Post by sheepdoll » Tue May 23, 2017 11:05 pm

The F4 is a cortex M9? I thought it was a cortex M3 ;>)

User avatar
RogerClark
Posts: 7447
Joined: Mon Apr 27, 2015 10:36 am
Location: Melbourne, Australia
Contact:

Re: Wur doomed... I tell you... aye... doomed...

Post by RogerClark » Wed May 24, 2017 12:02 am

I came across the original port to the F4 a few weeks ago



But it looks like it was ported 2 years ago.

danieleff
Posts: 336
Joined: Thu Sep 01, 2016 8:52 pm
Location: Hungary
Contact:

Re: Wur doomed... I tell you... aye... doomed...

Post by danieleff » Wed May 24, 2017 7:07 am

This is not that offtopic...
I also have a port for doom for arduino https://github.com/danieleff/chocolate-doom
But is missing the implementation (arduino.ino) for POSIX open/read to read doom1.wad; arduinoDisplay() to move I_VideoBuffer paletted 320x200 data to whatever screen; and arduinoDoPostEvents() for keypresses.
I do have one for F7/SDIO/ili9341/noinput at home, but is really reeeeally hacked up.
However with some work, it could run on anything arduino... with at least 500k flash, 300k ram, 4mb heap...

Post Reply