Working with Netduino Plus 2 - clock for ENC28J60

Post here first, or if you can't find a relevant section!
jarwil
Posts: 12
Joined: Wed Nov 23, 2022 2:06 pm

Re: Working with Netduino Plus 2 - clock for ENC28J60

Post by jarwil »

I changed the definition of HSE_VALUE in file stm32f4xx_hal_conf_default.h to 25000000.
I stil have a problem with reading data from DHT22. The sensor is ok, I have tested it also with Arduino Leonardo and working well.
Do I need change something else in clock setup?
I noticed that the 1s time interwal is now 1.02s
Post Reply

Return to “General discussion”