Working libraries, libraries being ported and related hardware
As a side note, the LCD works even in 16 bit FSMC mode, switching to 8bit FSMC just saves some pins for other purposes. However, I have some issues now, I ported part of the code to stm32cubeMX and it doesn't work!!! HAL is really Hell, nothing works
There is no DCMI implementation in stm32duino as far as I know. Anyway, I managed to get the HAL code working as well. Next to add DCMI camera.
So to follow up with the post steve is there other way aside from you mentioned above , I have Hx_3857 tft lcd using stm32f103 , core from roger your library looks work to me because the serial outputs . Hoping you can help mestevestrong wrote: ↑Tue Oct 03, 2017 6:52 pm[url=https://github.com/stevstrong/Adafruit_ ... TM32.h#L80]data port[/ur]
In order to use this pin you have to shortcut R4 on the back side of the board which is connected between the F103 chip and the BOOT1 jumper.
This resistor is 100Kohm so that the PB2 output will not work unless you solder a bridge over this resistor (shortcut)
HX8357D should be supported.
What have you tried and what is your problem exactly?