Choosing a suitable bootloader for stm32f103rct6
Choosing a suitable bootloader for stm32f103rct6
I'm new to stm32 microcontrollers, i designed a custom pcb with stm32f103rct6 which i'm testing, i also have a type c connector to dp/dm pins that i added to be able to program and read data that the uc is sending just like arduino. But i'm kinda confused about the bootloaders, which one to choose, i just want it to act like an arduino, would be really thankful if someone would steer me in the right direction.
Re: Choosing a suitable bootloader for stm32f103rct6
HID bootloader (https://github.com/Serasidis/STM32_HID_Bootloader) is what you want.
But bootloader needs to be compiled for each MCU and it's configuration (frequency sources and clocks).
But bootloader needs to be compiled for each MCU and it's configuration (frequency sources and clocks).
Re: Choosing a suitable bootloader for stm32f103rct6
that old 'roger's bootloader' may work too.
https://github.com/rogerclarkmelbourne/ ... bootloader
you could try flashing a stock firmware from there. it is normally for stm32f103c8. But f103rc may work, no guarantees though.
https://github.com/rogerclarkmelbourne/ ... bootloader
you could try flashing a stock firmware from there. it is normally for stm32f103c8. But f103rc may work, no guarantees though.