Board: Nucleo-64
Board Part Number: NucleoL476RG
Upload Method: STM32CubeProgrammer (SWD)
After I upload the code, I receive the following:
Code: Select all
Sketch uses 74896 bytes (7%) of program storage space. Maximum is 1048576 bytes.
Global variables use 22968 bytes (23%) of dynamic memory, leaving 75336 bytes for local variables. Maximum is 98304 bytes.
-------------------------------------------------------------------
STM32CubeProgrammer v2.3.0
-------------------------------------------------------------------
ST-LINK SN : 53FF67064988495729570287
ST-LINK FW : V2J34S7
Voltage : 3.27V
SWD freq : 4000 KHz
Connect mode: Under Reset
Reset mode : Hardware reset
Device ID : 0x415
Device name : STM32L4x1/STM32L475xx/STM32L476xx/STM32L486xx
Flash size : 1 MBytes
Device type : MCU
Device CPU : Cortex-M4
Memory Programming ...
Opening and parsing file: TX_STM32_20210130_1_NewBoard.ino.bin
File : TX_STM32_20210130_1_NewBoard.ino.bin
Size : 75352 Bytes
Address : 0x08000000
Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 36]
Download in Progress:
File download complete
Time elapsed during download operation: 00:00:02.820
RUNNING Program ...
Address: : 0x8000000
Application is running
Start operation achieved successfully