Command broken? Core not working correctly?? RU Sure???
Posted: Mon Sep 21, 2020 7:32 pm
Everyone:
There seems to be numerous inquiries and suggestions that core STM32 Arduino functions "do not work" or "works incorrectly" and I wish to state that while that may be an issue, it is unlikely that core functionality is not working. The Official STM32duino core is nearing 2 years and Roger's core is 5+ years; therefore commands & functions (ex: analogRead() and analogWrite() ) have been tested many, many times by users across the globe.
So, if you are having issues, suspect first that you are confused or misinformed. I strongly suggest that you reread the Arduino documentation here: https://www.arduino.cc/reference/en/ and give special attention to any examples.
If the above fails to highlight the problem, refer to examples that are part of the Arduino install. See this reference: https://www.arduino.cc/en/Tutorial/BuiltInExamples
For Roger's core, look here for known good examples:
https://github.com/rogerclarkmelbourne/ ... s/examples
Roger's core is mostly a "refresh" of the LeafLals' core which still has great information.
Following the steps above will ensure that by the time you get into the forum to craft & post an inquiry that much nebulous dialog can be avoided - in the interest of getting you the Op a better and more expedient answer.
Other resources:
- Adafruit: https://learn.adafruit.com/lesson-0-get ... he-lessons
- SparkFun: https://learn.sparkfun.com/tutorials/ta ... o?page=all
- 3.3V vs 5.0V logic levels: https://learn.sparkfun.com/tutorials/logic-levels/all
Happy computing,
Ray
There seems to be numerous inquiries and suggestions that core STM32 Arduino functions "do not work" or "works incorrectly" and I wish to state that while that may be an issue, it is unlikely that core functionality is not working. The Official STM32duino core is nearing 2 years and Roger's core is 5+ years; therefore commands & functions (ex: analogRead() and analogWrite() ) have been tested many, many times by users across the globe.
So, if you are having issues, suspect first that you are confused or misinformed. I strongly suggest that you reread the Arduino documentation here: https://www.arduino.cc/reference/en/ and give special attention to any examples.
If the above fails to highlight the problem, refer to examples that are part of the Arduino install. See this reference: https://www.arduino.cc/en/Tutorial/BuiltInExamples
For Roger's core, look here for known good examples:
https://github.com/rogerclarkmelbourne/ ... s/examples
Roger's core is mostly a "refresh" of the LeafLals' core which still has great information.
Following the steps above will ensure that by the time you get into the forum to craft & post an inquiry that much nebulous dialog can be avoided - in the interest of getting you the Op a better and more expedient answer.
Other resources:
- Adafruit: https://learn.adafruit.com/lesson-0-get ... he-lessons
- SparkFun: https://learn.sparkfun.com/tutorials/ta ... o?page=all
- 3.3V vs 5.0V logic levels: https://learn.sparkfun.com/tutorials/logic-levels/all
Happy computing,
Ray